CBSE Class 11 Chemistry Classification of Elements and Periodicity of Properties– Get here the Notes for Class 11 Chemistry Classification of Elements and Periodicity of Properties. Candidates who are ambitious to qualify the Class 11 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 11 Chemistry study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of CBSE Class 11 Chemistry for topic Classification of Elements and Periodicity of Properties.
- Class: 11th
- Subject: Chemistry
- Topic: Classification of Elements and Periodicity of Properties
- Resource: Notes
CBSE Notes Class 11 Chemistry Classification of Elements and Periodicity of Properties
Candidates who are pursuing in CBSE Class 11 are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for CBSE Class 11 Chemistry Classification of Elements and Periodicity of Properties from this article.
Classification of Elements
With the discovery of a large number of elements, it became difficult to study the elements individually, so classification of elements was done to make the study easier.
Earlier Attempts to Classify Elements
Many attempts were made to classify the known elements from time to time. The earlier attempts are as follows:
Prout’s Hypothesis (1815)
According to this theory, hydrogen atom was considered as the fundamental unit from which all other atoms were made. It is also known as unitary theory.
Dobereiner’s Triads (1829)
Dobereiner classified the elements into groups of three elements with similar properties in such a manner so that the atomic weight of the middle element was the arithmetic mean of the other two, e.g.,
Mean of atomic masses = (7 + 39) / 2 = 23
Similarly CI, Br, I; Ca, Sr, Ba are two more examples of such triads.
Limitations Dobereiner could not arrange all the elements known at that time into triads. He could identify only three such triads that have been mentioned.
Newland’s Octaves (1864) (Law of Octaves
Newland states that when elements are arranged in order of increasing atomic masses, every eighth element has properties similar to the first just like in the musical note [Every eighth musical note 1S the same as the first mentioned note]. This can be illustrated as given below
1. This classification was successful up to the element calcium.
2. When noble gas elements were discovered at a later stage, their inclusion in these octaves disturbed the entire arrangement.
Lother Meyer’s Atomic Volume Curve (1869)
Meyer presented the classification of elements in the form of a curve between atomic volume and atomic masses and state that the properties of the elements are the periodic functions of their atomic volumes.
[Here, atomic volume = molecular mass / density
He concluded that the elements with similar properties occupy similar position in the curve.
Mendeleef’s Periodic Table
Mendeleefs Periodic Table is based upon Mendeleefs periodic law which states ‘The physical and chemical properties of the elements are a periodic function of their atomic masses.”
At the time of Mendeleef, only 63 elements were known.
This Periodic Table is divided into seven horizontal rows (periods) and eight vertical columns (groups). Zero group was added later on in the modified Mendeleefs Periodic Table.
Importance of Mendeleers Periodic Table
Few important achievements of Periodic Table are
1 Systematic study of the elements.
2. Prediction of new elements and their properties. he left space for the elements yet to be discovered. e.g., he left spaces for Ga and Ge and named these elements as ERa-aluminium (Ga) and EKa-silicon (Ge) respectively
3. Atomic mass correction of doubtful elements on the basis of their expected positions and properties.
Modified Form of Mendeleef’s Periodic Table
Defects in the Mendeleef’s Periodic Table
(i) Position of hydrogen Hydrogen has been placed in group IA (alkali metals). but it also resembles with halogens of group VIlA. Thus. its position in the Mendeleef’s Periodic Table is controversial.
(ii) Position of isotopes As Mendeleef’s classification is based on atomic weight, Isotopes would have to be placed in different positions due to therr different atomic weights, e.g., 1H1 2H1 3H1 would occupy different positions.
(iii) Anomalous positions of some elements Without any proper justification. in some cases the element with higher atomic mass precedes the element with lower atomic mass. For example, AI (atomic weight = 39.9) precedes K (atomic weight = 39.1) and similarly Co (atomic weight. = 58.9) has been placed ahead of Ni (atomic weight = 58.7).
(iv) Position of Lanthanoids and actinoids Lanthanoids and actinoids were not placed in the main Periodic Table.
Modern Periodic Table (1913)
Moseley modified Mendeleefs periodic law. He stated “Physical and chemical properties of elements are the periodic function of their atomic numbers.” It is known as modern periodic law and considered as the basis of Modern Periodic Table.
When the elements were arranged in increasing order of atomic numbers, it was observed that the properties of elements were repeated after certain regular intervals 01 2, 8, 8, 18, 18 and 32. These numbers are called magic numbers and cause of periodicity in properties due to repetition of similar electronic configuration.
Structural Features of Long Form of Periodic Table
1. Long form of Periodic Table is called Bohr’s Periodic Table. There arc 18 groups and seven periods in this Periodic Table
2. The horizontal rows are called periods.
- First period (1H – 2He) contains 2 elements. It is the shortest period
- Second period (3Li – 10Ne) and third period (11 Na – 18Ar) contain is elements each. These are short periods.
- Fourth period (19K – 36Kr) and fifth period (37Rb – 54Xe) contain 18 elements each. These are long periods.
- Sixth period (55Cs – 86 Rn) consists of 32 elements and is the longest period.
- Seventh period starting with 87Fr is incomplete and consists of 19 elements.
3. The 18 vertical columns are known as groups.
- Elements ot group 1arc called alkali metals.
- Elements of group 2 are called alkaline earth metals.
- Elements of group 16 are called chalcogens [ore forming elements].
- Elements of group 17 are called halogens. [s[sea salt forming]li>
- Elements of group 18 are called noble gases.
Anomalous behaviour of the first element of a group. The first element of a group differs considerably from its congeners (i.e., the rest of the elements of its group).
This is due to (i) small size (ii) high electronegativity and (iii) non availability of d·orbitals for bonding. Anomalous behaviour is observed among the second row elements (i.e., Li to F).
4. The Periodic Table is divided into foul’ main blocks (s, p, d and n depending upon the subshell to which the valence electron enters into.
(a) s-block elements Ist and IInd group elements belong to this block and the last electron enters in s-subshell.
General electronic configuration is ns1 – 2
(b) p-block elements Group 13th to 18th belong to this block in which last electron enters in p-orbital.
General electronic configuration is ns2 np1 – 6
This is the only block which contains metal, non-metal and metalloids. Examples of metalloids are B, SI Ge, As, Sb, Te and At.
The elements of s-and p-block elements are collectively called representative elements.
(c) d-block elements Group 3rd to 12th belong to this block, in which last electron enters in d-orbit.
They have inner incomplete shell. so known as transition elements.
General electronic configuration is ns1 – 2 (n – 1)d1 – 10
d-block elements are generally coloured, paramagnetic and exhibit variable valency.
(d) f-block elements They constitute two series 4f (lanthanoids) and 5f (actinides) in which last electron is in 4f and 5f subshell respectively.
General electronic configuration
(n – 2) f1 – 14(n – 1) d0 – 1 ns2
The f-block elements are also called as inner-transition elements.
(Elements with atomic number greater than 92 (U92) are called the transuranium elements. All these elements are man-made through artificial nuclear reactions.
Very recently. on August 16, 2003, IUPAC approved the name for the element of atomic number 110, as Darmstadtium, with symbol Ds].
Limitations of Long Form of Periodic Table
In the long form of the Periodic Table :
1. The position of hydrogen still remains uncertain.
2. The inner-transition elements do not find a place in the main body of the table. They are placed separately.
Predicting the Position of an Element in the Periodic Table
First of all write the complete electronic configuration. The principle quantum number of the valence shell represents the period of the element.
The subshell in which the last electron is filled corresponds to the block of the element.
Group of the element is predicted from the electrons present in the outermost (n) or penultimate (n -1) shell as follows:
For s-block elements;
group number = number of ns-electrons
For p-block elements;
group number = 10 + number of ns and np electrons
For d-block elements;
group number = the sum of the number of (n -1) d
and ns electrons.
For f-block elements; group number is 3.
IUPAC Nomenclature of Elements With Z > 100
The names are derived directly from the atomic numbers using numerical roots for 0 and numbers from 1-9 and adding the suffix ium.
The IUPAC names and symbols of elements with Z > 100 are
The properties which are directly or indirectly related to their electronic configuration and show gradual change when we move from left to right in a period or from top to bottom in a group are called periodic properties.
It is the distance from the centre of the nucleus to the outermost shell of electrons. Covalent radius for an atom A in a molecule A2
rA = rA + rA / 2 = dA – A / 2
For heteroatomic molecule AB,
dA – B = rA + rB + 0.009 (XA – XB)
where, XA and XB are electronegativities of A and B.
In general, the atomic size decreases on moving from left to right in a period due to increase in effective nuclear charge and increases on moving from top to bottom in a group due to addition of new shells.
van der Waals’ Radius
It is defined as one-half of the distance between the nuclei of two non – bonded isolated atoms or two adjacent atoms belonging to two neighbOuring molecules of an element in the solid state.
It is define as one-half of the distance between the centres of nuclei of the two adjacent atoms in the metallic crystal.
An atom can be changed to a cation by 10RS of electrons and to an anion by gain of electrons. A cation is always smaller than the parent atom because during its formation effective nuclear charge increases and sometimes a shell may also decrease. On the other hand, the size of an anton is always larger than the parent atom because during its formation effective nuclear charge decreases.
In case of isoelectronic ions, r he higher the nuclear charge. smaller is the size. e.g., AI3 < Mg2+ < Na+ < f– < O2- < N3-
The order of radii is
covalent radius < metallic radius < van der Waals’ radius
Ionisation Enthalpy (IE)
It is the amount of energy required to remove the loosely bound electron from the isol~ted gaseous atom.
A(g) + IE → A+ (g) + e–
VarIOUS factors with which IE vanes are :
(i) Atomic size. varies inversely
(ii) Screening effect: varies inversely
(iii) Nuclear charge: varies directly
Generally left to right in periods ionisation enthalpy increases; down the group, it decreases.
IE values of inert gases are exceptionally higher due to stable configuration.
Successive ionisation enthalpies
IE3 > IE2 > IE1
IE1 of N is greater than that of oxygen due to stable half – filled 2p-orbitals.
Among transition elements of 3d-series, 24Cr and 29Cu have higher IE2 due to half-filled and fully-filled stable d-orbitals
Electron Gain Enthalpy (EGE or ΔHe g)
It is the amount of energy released when an electron is added in an isolated gaseous atom. First electron gain enthalpy is negative while the other successive electron gain enthalpy will be positive due to repulsion between the electrons already present in the anion and the electron being added.
Various factors with which electron gain enthalpy varies are :
(i) Atomic size: varies directly
(ii) Nuclear charge: varies directly
Along a period, electron gain enthalpy becomes more and more negative while on moving down the group, it becomes less negative.
Noble gases have positive electron gain enthalpies.
Halogen have maximum value of ΔHe g with in a period due to smallest atomic size.
F and O atom have small size and high charge density, therefore have lower electron gain enthalpy, than Cl and S respectively
Cl > F; S > O
Elements having half-filled and fully-filled orbitals exhibit more stability. therefore, electron gain enthalpy will be low for such elements.
Electron gain enthalpy can be measured by Born-Haber cycle and elements with high ΔHe g are good oxidising agent.
It is defined as the tendency of an atom to attract the shared electron pair towards itself in a covalent bond. Various factors with which electronegativity varies are :
(i) Atomic size: varies inversely
(ii) Charge on the ion: varies directly, e.g., Li < Li+, Fe2+ < Fe3+
(iii) Hybridisation : (Electronegativity &infi; s-character in the hybrid orbital)
Electronegativity of carbon atom = C2H6 < C2H4 < C2H2
In periods as we move from left to right electronegativity increases, while in the groups electronegativity decreases down the group.
For noble gases, its value is taken as zero.
Electronegativity helps to predict the polarity of bonds and dipole moment of molecules.
Electronegativity order of some elements (on Pauling scale) is
(i) Mulliken scale
Electronegativity (x) = IE + ΔHe g / 2
(ii) Pauling scale The difference in electronegativity of two atoms A and Bis given by the relationship
xB – xA = 0.18 √Δ
where, Δ = EA – B – √EA – A * EB – B
(Δ is known as resonance energy.)
EA – B, EA – A and EB – B represent bond dissociation energies of the bonds A – B, A – A and B – B respectively.
(iii) Allred and Rochow method
Electronegativity = 0.744 + 0.359 Zeff / r2
where, Zeff is the effective nuclear charge = Z – σ
where, σ is screening constant. It’s value can be determined by Slater’s rule.
- It is defined as the combining capacity of the element. The valency of an element is related to the electronic configuration of its atom and usually determined by electrons present in the valence shell,
- On moving along a period from left to right, valency increases from 1 to 4 and then decreases to zero (for noble gases) while on moving down a group the valency remains the same.
- Transition metals exhibit variable valency because they can use electron (rom outer as well as penultimate shell.
- Reactivity of metal increases with decrease in IE, electronegativity and increase in atomic size as well as electropositive character.
- Reactivity of non-metals increases with increase in electronegativity as well as electron gain enthalpy and decrease in atomic radii.
Melting and Boiling Points
- On moving down the group, the melting point and boiling point for metallic elements go on decreasing due to the decreasing forces of attraction. However, for non-metals, melting point and boiling point generally increase down the group.
[A[Along a period from left to right, melting point and boiling point increases and reaches a maximum value in the middle of the period and then start decreasing]/p>
- Tungsten (W) has highest m.p. (3683K) among metals, carbon (diamond) has the highest m..p, (4000 K) among non-metals.
- Li metal has minimum density while iridium (Ir) metal has maximum density.
Electropositivity or Metallic Character
- The tendency of an atom of the element to lose valence electrons and form positive ion is called electropositivity.
- Greater the electropositive character, greater is the metallic character.
- Electropositive character decreases on moving across the period and increases on moving down the group.
- Alkali metals are the most electropositive and halogens are the least electropositive element in their respective period.
- Basic nature of oxides of metallic character, i.e., it also decreases along a period and increases down the group.
Certain elements of 2nd period show similarity in properties with their diagonal elements in the 3rd period as shown below :
Thus, Li resembles Mg, Be resembles Al and B resembles Si. This is called diagonal relationship and is due to the reason that these pairs of elements have almost identical ionic radii and polarizing power (i.e., charge/size ratio). Elements of third period, i.e., Mg, Al and Si are known as bridge elements.
Class 11 Key Points, Important Questions & Practice Papers
Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 11 in both Hindi and English language form the link below.
Class 11 NCERT Solutions
Candidates who are studying in Class 11 can also check Class 11 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 11th. Candidates can click on the subject wise link to get the same. Class 11 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.
Class 11 Mock Test / Practice
Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 11 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 11 Mock Test / Practice links below.
Class 11 Exemplar Questions
Exemplar Questions Class 11 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 11. Question from very important topics is covered by Exemplar Questions for Class 11.
To get fastest exam alerts and government job alerts in India, join our Telegram channel.