Class 11 Physics Work, Power and Energy – Get here the Notes for Class 11 Physics Work, Power and Energy. Candidates who are ambitious to qualify the Class 11 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 11 Physics study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of Class 11 Physics for topic Work, Power and Energy.

**Class:**11th**Subject:**Physics**Topic:**Work, Power and Energy**Resource:**Notes

## CBSE Notes Class 11 Physics Work, Power, and Energy

Candidates who are pursuing in Class 11 are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for Class 11 Physics Work, Power and Energy from this article.

**Work**

When a force acts on an object and the object actually moves in the direction of force, then the work is said to be done by the force.

Work done by the force is equal to the product of the force and the displacement of the object in the direction of force.

If under a constant force F the object displaced through a distance s, then work done by the force

W = F * s = F s cos θ

where a is the smaller angle between F and s.

Work is a scalar quantity, Its S1 unit is joule and CGS unit is erg.

∴ 1 joule = 10^{7} erg

Its dimensional formula is [ML^{2}T^{-2}].

Work done by a force is zero, if

(a) body is not displaced actually, i.e., s = 0

(b) body is displaced perpendicular to the direction of force, i.e.,

θ = 90°

Work done by a force is **positive** if angle between F and s is acute angle.

Work done by a force is **negative** if angle between F and s is obtuse angle.

Work done by a constant force depends only on the initial and final Positions and not on the actual path followed between initial and final positions.

**Work done in different conditions**

(i) Work done by a variable force is given by

W = ∫ F * ds

It is equal to the area under the force-displacement graph along with proper sign.

Work done = Area ABCDA

(ii) Work done in displacing any body under the action of a number of forces is equal to the work done by the resultant force.

(iii) In equilibrium (static or dynamic), the resultant force is zero therefore resultant work done is zero.

(iv) If work done by a force during a rough trip of a system is zero, then the force is conservative, otherwise it is called non-conservative force.

- Gravitational force, electrostatic force, magnetic force, etc are conservative forces. All the central forces are conservative forces.
- Frictional force, viscous force, etc are non-conservative forces.

(v) Work done by the force of gravity on a particle of mass m is given by W = mgh

where g is acceleration due to gravity and h is height through particle one displaced.

(vi) Work done in compressing or stretching a spring is given by

W = 1 / 2 kx^{2}

where k is spring constant and x is displacement from mean position.

(vii) When on end of a spring is attached to a fixed vertical support and a block attached to the free end moves on a horizontal

table from x = x_{1} to x = x_{2} then W = 1 / 2 k (x^{2}x_{2} – x^{2}x_{1})

(viii) Work done by the couple for an angular displacement θ is given by W = i * θ

where i is the torque of the couple.

**power**

The time rate of work done by a body is called its power.

Power = Rate of doing work = Work done / Time taken

If under a constant force F a body is displaced through a distance **s** in time t, the power

p = W / t = F * s / t

But s / t = v ; uniform velocity with which body is displaced.

∴ P = F * v = F v cos θ

where θ is the smaller angle between F and v.

power is a scalar quantity. Its S1 unit is watt and its dimensional formula is [ML^{2}T^{-3}].

Its other units are kilowatt and horse power,

1 kilowatt = 1000 watt

1 horse power = 746 watt

**Energy **

Energy of a body is its capacity of doing work.

It is a scalar quantity.

Its S1 unit is joule and CGS unit is erg. Its dimensional formula is [ML^{3}T^{-3}].

There are several types of energies, such as mechanical energy (kinetic energy and potential energy), chemical energy, light energy, heat energy, sound energy, nuclear energy, electric energy etc.

**Mechanical Energy**

The sum of kinetic and potential energies at any point remains constant throughout the motion. It does not depend upon time. This is known as law of conservation of mechanical energy.

Mechanical energy is of two types:

1. **Kinetic Energy**

The energy possessed by any object by virtue of its motion is called its kinetic energy.

Kinetic energy of an object is given by

k = 1 / 2 mv^{2} = p^{2} / 2m

where m = mass of the object, U = velocity of the object and p = mv = momentum of the object.

2. **Potential Energy**

The energy possessed by any object by virtue of its position or configuration is called its potential energy.

There are three important types of potential energies:

(i) **Gravitational Potential Energy** If a body of mass m is raised through a height h against gravity, then its gravitational potential energy = mgh,

(ii) **Elastic Potential Energy** If a spring of spring constant k is stretched through a distance x. then elastic potential energy of the spring = 1 . 2 kx^{2}

The variation of potential energy with distance is shown in figure.

Potential energy is defined only for conservative forces. It does not exist for non-conservative forces.

Potential energy depends upon frame of reference.

(iii) **Electric Potential Energy** The electric potential energy of two point charges ql and q’l. separated by a distance r in vacuum is given by

U = 1 / 4πΣ_{0} * q_{1}q_{2} / r

Here 1 / 4πΣ_{0} = 9.0 * 10^{10} N-m^{2} / C^{2} constant.

**Work-Energy Theorem**

Work done by a force in displacing a body is equal to change in its kinetic energy.

where, K_{i} = initial kinetic energy

and K_{f} = final kinetic energy.

Regarding the work-energy theorem it is worth noting that

(i) If W_{net} is positive, then K_{f} – K_{i} = positive, i.e., K_{f} > K_{i} or kinetic energy will increase and vice-versa.

(ii) This theorem can be applied to non-inertial frames also. In a non-inertial frame it can be written as:

Work done by all the forces (including the Pseudo force) = change in kinetic energy in non-inertial frame.

**Mass-Energy Equivalence**

According to Einstein, the mass can be transformed into energy and vice – versa.

When Δm. mass disappears, then produced energy

E = Δmc^{2}

where c is the speed of light in vacuum.

**Principle of Conservation of Energy**

The sum of all kinds of energies in an isolated system remains constant at all times.

**Principle of Conservation of Mechanical Energy**

For conservative forces the sum of kinetic and potential energies of any object remains constant throughout the motion.

According to the quantum physics, mass and energy are not conserved separately but are conserved as a single entity called ‘mass-energy’.

**Collisions**

Collision between two or more particles is the interaction for a short interval of time in which they apply relatively strong forces on each other.

In a collision physical contact of two bodies is not necessary. rrhere are two types of collisions:

1. **Elastic collision**

The collision in which both the momentum and the kinetic energy of the system remains conserved are called elastic collisions.

In an elastic collision all the involved forces are conservative forces.

Total energy remains conserved.

2. **Inelastic collision**

The collision in which only the momentum remains conserved but kinetic energy does not remain conserved are called inelastic collisions.

In an inelastic collision some or all the involved forces are non-conservative forces.

Total energy of the system remains conserved.

If after the collision two bodies stick to each other, then the collision is said to be perfectly inelastic.

**Coefficient of Restitution or Resilience**

The ratio of relative velocity of separation after collision to the velocity of approach before collision is called coefficient of restitution resilience.

It is represented by e and it depends upon the material of the collidingI bodies.

For a perfectly elastic collision, e = 1

For a perfectly inelastic collision, e = 0

For all other collisions, 0 < e < 1

**One Dimensional or Head-on Collision**

If the initial and final velocities of colliding bodies lie along the same line, then the collision is called one dimensional or head-on collision.

**Inelastic One Dimensional Collision**

Applying Newton’s experimental law, we have

Velocities after collision

v_{1} = (m_{1} – m_{2}) u_{1} + 2m_{2}u_{2} / (m_{1} + m_{2})

and v_{2} = (m_{2} – m_{1}) u_{2} + 2m_{1}u_{1} / (m_{1} + m_{2})

When masses of two colliding bodies are equal, then after the collision, the bodies exchange their velocities.

v_{1} = u_{2} and v_{2} = u_{1}

If second body of same mass (m_{1} = m_{2}) is at rest, then after collision first body comes to rest and second body starts moving with the

initial velocity of first body.

v_{1} = 0 and v_{2} = u_{1}

If a light body of mass m_{1} collides with a very heavy body of mass m_{2} at rest, then after collision.

v_{1} = – u_{1} and v_{2} = 0

It means light body will rebound with its own velocity and heavy body will continue to be at rest.

If a very heavy body of mass m_{1} collides with a light body of mass m_{2}(m_{1} > > m_{21}) at rest, then after collision

v_{1} = u_{1} and v_{2} = 2u_{1}

**In Inelastic One Dimensional Collision**

Loss of kinetic energy

ΔE = m_{1}m_{2} / 2(m_{1} + m_{2}) (u_{1} – u_{2})^{2} (1 – e^{2})

**In Perfectly Inelastic One Dimensional Collision**

Velocity of separation after collision = 0.

Loss of kinetic energy = m_{1}m_{2} (u_{1} – u_{2})^{2} / 2(m_{1} + m_{2})

If a body is dropped from a height h_{o} and it strikes the ground with velocity v_{o} and after inelastic collision it rebounds with velocity v_{1} and rises to a height h_{1}, then

If after n collisions with the ground, the body rebounds with a velocity v_{n} and rises to a height h_{n} then

e^{n} = v_{n} / v_{o} = √h^{n} / h^{o}

**Two Dimensional or Oblique Collision**

If the initial and final velocities of colliding bodies do not lie along the same line, then the collision is called two dimensional or oblique Collision.

In horizontal direction,

m_{1}u_{1} cos α_{1 }+ m_{2}u_{2} cos α_{2}= m_{1}v_{1} cos β_{1} + m_{2}v_{2} cos β_{2}

In vertical direction.

m_{1}u_{1} sin α_{1} – m_{2}u_{2} sin α_{2} = m_{1}u_{1} sin β_{1} – m_{2}u_{2} sin β_{2}

If m_{1} = m_{2} and α_{1} + α_{2} = 90°

then β_{1} + β_{2} = 90°

If a particle A of mass m_{1} moving along z-axis with a speed u makes an elastic collision with another stationary body B of mass m_{2}

From conservation law of momentum

m_{1}u = m_{1}v_{1} cos α + m_{2}v_{2} cos β

O = m_{1}v_{1} sin α – m_{2}v_{2} sin β

### Class 11 Key Points, Important Questions & Practice Papers

Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 11 in both Hindi and English language form the link below.

### Class 11 NCERT Solutions

Candidates who are studying in Class 11 can also check Class 11 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 11th. Candidates can click on the subject wise link to get the same. Class 11 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.

### Class 11 Mock Test / Practice

Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 11 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 11 Mock Test / Practice links below.

** **Class 11 Exemplar Questions

Exemplar Questions Class 11 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 11. Question from very important topics is covered by Exemplar Questions for Class 11.

CBSE Notes for Class 11 Physics Notes Biology Notes Maths Notes Chemistry Notes

To get fastest exam alerts and government job alerts in India, join our Telegram channel.

## Discussion about this post