CBSE Class 11 Maths Circles – Get here the Notes for Class 11 Circles. Candidates who are ambitious to qualify the Class 11 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 11 Maths study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of CBSE Class 11 Maths for topic Circles.

**Class:**11th**Subject:**Maths**Topic:**Circles**Resource:**Notes

## CBSE Notes Class 11 Maths Circles

Candidates who are pursuing in CBSE Class 11 Maths are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for CBSE Class 11 Maths Circles from this article.

Circle is defined as the locus of a point which moves in a plane such that its distance from a fixed point in that plane is constant.

**Standard Forms of a Circle**

(i) Equation of circle having centre (h, k) and radius (x — h)^{2} + (y — k)^{2} = a^{2}.

If centre is (0, 0), then equation of circle is x^{2} + y^{2} = a^{2}.

(ii) When the circle passes through the origin, then equation of the circle is x^{2} + y^{2} — 2hx — 2ky = 0.

(iii) When the circle touches the X-axis, the equation is x^{2} + y^{2} — 2hx — 2ay + h^{2} = O.

(iv) Equation of the circle, touching the Y-axis is x^{2} + y^{2} — 2ax — 2ky + k^{2} = 0.

(v) Equation of the circle, touching both axes is x^{2} + y^{2} — 2ax — 2ay + a^{2} = O.

(vi) Equation of the circle passing through the origin and centre lying on the X-axis is x^{2} + y^{2} — 2ax = O.

(vii) Equation of the circle passing through the origin and centre lying on the Y-axis is x^{2} + y^{2} – 2ay = 0.

(viii) Equation of the circle through the origin and cutting intercepts a and b on the coordinate axes is x^{2} + y^{2} — by = 0.

(ix) Equation of the circle, when the coordinates of end points of a diameter are (x_{1}, y_{1}) and (x_{2}, y_{2}) is

(x — x_{1})(x — x_{2}) + (y – y_{1})(y — y_{2}) = 0.

(x) Equation of the circle passes through three given points (x_{1}, y_{1}), (x_{2}, y_{2}) and (x_{3}, y_{3}) is

(xi) Parametric equation of a circle

(x – h)^{2} + (y – k)^{2} = a^{2} is

x = h + a cosθ, y = k + a sinθ,

0 ≤ θ ≤ 2π

For circle x^{2} + y^{2} = a^{2}, parametric equation is

x = a cos θ, y = a sin θ

**General Equation of a Circle**

The general equation of a circle is given by x^{2} + y^{2} + 2gx + 2fy + c = 0, where centre of the circle = (- g, – f)

Radius of the circle = √g^{2} + f^{2} – c

- If g
^{2}+ f^{2}– c > 0, then the radius of the circle is real and hence the circle is also real. - If g
^{2}+ f^{2}– c = 0, then the radius of the circle is 0 and the circle is known as point circle. - If g
^{2}+ f^{2}– c< 0, then the radius of the circle is imaginary. Such a circle is imaginary, which is not possible to draw.

**Position of a Point with Respect to a Circle**

A point (x_{1}, y_{1}) lies outside on or inside a circle

S ≡ x^{2} + y^{2} + 2gx + 2fy + c = 0, according as S_{1} > , = or < 0

where, S_{1} = x_{1}^{2} + y_{1}^{2} + 2gx_{1}, + 2fy_{1}+ c

**Intercepts on the Axes**

The length of the intercepts made by the circle x^{2} + y^{2} + 2gx + 2fy + c = 0 with X and Y-axes are

2√g^{2} – c and 2√g^{2} – c.

- If g
^{2}> c, then the roots of the equation x^{2}+ 2gx + c = 0 are real and distinct, so the circle x^{2}+ y^{2}+ 2gx + 2fy + c = 0 meets the X-axis in two real and distinct points. - If g
^{2}= c, then the roots of the equation x^{2}+ 2gx + c = 0 are real and equal, so the circle touches X-axis, then intercept on X-axis is O. - If g
^{2}< c, then the roots of the equation x^{2}+ 2gx + c = 0 are imaginary, so the given circle does not meet X-axis in real point. Similarly, the circle x^{2}+ y^{2}+ 2gx + 2fy + c = 0 cuts the Y-axis in real and distinct points touches or does not meet in real point according to f^{2}>, = or < c

**Equation of Tangent**

A line which touch only one point of a circle.

**1. Point Form**

- The equation of the tangent at the point P(x
_{1}, y_{1}) to a circle x^{2}+ y^{2}2gx + 2fy + c= 0 is xx_{1}+ yy_{1}+ g(x + x_{1}) + f(y + y_{1}) + c = 0 - The equation of the tangent at the point P(x
_{1}, y_{1}) to a circle x^{2}+ y^{2}is xx_{1}+ yy_{1}= r^{2}

**2. Slope Form**

(i) The equation of the tangent of slope m to the circle x^{2} + y^{2} + 2gx + 2fy + c = 0

are y + f = m(x + g) ± √(g^{2} + f^{2} — c)(1 + m^{2})

(ii) The equation of the tangents of slope m to the circle (x – a)^{2} (y – b)^{2} = r^{2} are y – b = m(x – a) ± r√(1 + m^{2}) and the coordinates of the points of contact are

(iii) The equation of tangents of slope m to the circle x^{2} + y^{2} = r^{2} are y = mx ± r√(1 + m^{2}) and the coordinates of the point of contact are

**3. Parametric Form**

The equation of the tangent to the circle (x – a)^{2} + (y – b)^{2} = r^{2} at the point (a + r cos θ, b + r sinθ) is (x – a) cos θ + (y – b) sin θ = r.

**Equation of Normal**

A line which is perpendicular to the tangent.

**1. Point Form**

- (i) The equation of normal at the point (x
_{1}, y_{1}) to the circle x^{2}+ y^{2}+ 2gx + 2fy + c = 0 is

y – y_{1}= [(y_{1}+ f)(x – x_{1})]/(x_{1}+ g)

(y_{1}+ f)x – (x_{1}+ g)y + (gy_{1}– fx_{1}) = 0 - (ii) The equation of normal at the point (x
_{1}, y_{1}) to the circle

x^{2}+ y^{2}= r^{2}is x/x_{1}= y/y_{1}

**2. Parametric Form**

The equation of normal to the circle x^{2} + y^{2} = r^{2} at the point (r cos θ, r sin θ) is

(x/r cos θ) = (y/r sin θ)

or y = x tan θ.

Important Points to be Remembered

(i) The line y = mx + c meets the circle in unique real point or touch the circle

x_{2} + y_{2} + r_{2}, if r = |c/√1 + m_{2}

and the point of contacts are

(ii) The line lx + my + n = 0 touches the circle x_{2} + y_{2} = r_{2}, if r_{2}(l_{2} + m_{2}) = n_{2}.

(iii) Tangent at the point P (θ) to the circle x_{2} + y_{2} = r_{2} is x cos θ + y sin θ = r.

(iv) The point of intersection of the tangent at the points P(θ_{1}) and Q(θ_{2}) on the circle x^{2} + y^{2} = r^{2}

(v) Normal at any point on the circle is a straight line which is perpendicular to the tangent to the curve at the point and it passes through the centre of circle.

(vi) Power of a point (x_{1}, y_{1}) with respect to the circle x^{2} + y^{2} + 2gx + 2fy + c = 0 is x_{1}^{2} + y_{1}^{2} + 2gx_{1} + 2fy_{1} + c.

(vii) If P is a point and C is the centre of a circle of radius r, then the maximum and minimum distances of P from the circle are CP + r and CP — r , respectively.

(viii) If a line is perpendicular to the radius of a circle at its end points on the circle, then the line is a tangent to the circle and vice-versa.

**Pair of Tangents**

(i) The combined equation of the pair of tangents drawn from a point P(x_{1}, y_{1}) to the circle x^{2} + y^{2} = r^{2} is

(x^{2} + y^{2} – r^{2})(x_{1}^{2}+ y_{1}^{2} – r_{1}^{2}) = (xx_{1} + yy_{1} – r^{2})^{2}

or SS_{1} = T^{2}

where, S = x^{2} + y^{2} – r^{2}, S_{1} = x_{1}^{2}+ y_{1}^{2} – r_{1}^{2}

and T = xx_{1} + yy_{1} – r^{2}

(ii) The length of the tangents from the point P(x_{1}, y_{1}) to the circle x^{2} + y^{2} + 2gx + 2fy + c = 0 is equal to

(iii) Chord of contact TT’ of two tangents, drawn from P(x_{1}, y_{1}) to the circle x^{2} + y^{2} = r^{2} or T = 0.

Similarly, for the circle

x^{2} + y^{2} + 2gx + 2fy + c = 0 is

xx_{1} + yy_{1} + g(x + x_{1}) + f(y + y_{1}) + c = 0

**(iv) Equation of Chord Bisected at a Given Point** The equation of chord of the circle S ≡ x^{2} + y^{2} + 2gx + 2fy + c = 0 bisected at the point (x_{1}, y_{1}) is give by T = S_{1}.

i.e., xx_{1} + yy_{1} + g (x + x_{1}) + f (y + y_{1}) + c

= x_{1}^{2} + y_{1}^{2} + 2gx_{1} + fy_{1} + c

(v) Director Circle The locus of the point of intersection of two perpendicular tangents to a given circle is called a director circle. For circle x^{2} + y^{2} = r^{2}, the equation of director circle is x^{2} + y^{2} = 2r^{2}.

**Common Chord**

The chord joining the points of intersection of two given circles is called common chord.

(i) If S_{1} = 0 and S_{1} = 0 be two circles, such that

S_{1} ≡ x^{2} + y^{2} + 2g_{1}x + 2f_{1}y + c_{1} = 0

and S_{2} ≡ x^{2} + y^{2} + 2g_{2}x + 2f_{2}y + c_{2} = 0

then their common chord is given by S_{1} — S_{2} = 0

(ii) If C_{1}, C_{2} denote the centre of the given circles, then their common chord

PQ = 2 PM = 2√(C_{1}P)^{2} – C_{1}M)^{2}

(iii) If r_{1}, and r_{2} be the radii of ‘two circles, then length of common chord is

**Angle of Intersection of Two Circles**

The angle of intersection of two circles is defined as the angle between the tangents to the two circles at their point of intersection is given by

cos θ = (r_{1}^{2} + r_{2}^{2} – d^{2})/(2r_{1}r_{2})

**Orthogonal Circles**

Two circles are said to be intersect orthogonally, if their angle of intersection is a right angle.

If two circles

S_{1} ≡ x^{2} + y^{2} + 2g_{1}x + 2f_{1}y + C_{1} = 0 and

S_{2} ≡ x^{2} + y^{2} + 2g_{2}x + 2f_{2}y + C_{2} = 0 are orthogonal, then 2g_{1}g_{2} + 2f_{1}f_{2} = c_{1} + c_{2}

**Family of Circles**

(i) The equation of a family of circles passing through the intersection of a circle x^{2} + y^{2} + 2gx + 2fy + c = 0 and line

L = lx + my + n = 0 is S + λL = 0

where, X, is any real number.

(ii) The equation of the family of circles passing through the point A(x_{1}, y_{1}) and B (x_{1}, y_{1}) is

(iii) The equation of the family of -circles touching the circle

S ≡ x^{2} + y^{2} + 2gx + 2fy + c = 0 at point P(x_{1}, Y_{1}) is

xx^{2} + y^{2} + 2gx + 2fy + c + λ, [xx_{1} + yy_{1} + g(x + x_{1}) + f(Y+ Y_{1}) + c] = 0 or S + λL = 0, where L = 0 is the equation of the tangent to

S = 0 at (x_{1}, y_{1}) and X ∈ R

(iv) Any circle passing through the point of intersection of two circles S_{1} and S_{2} is S_{1} +λ(S_{1} — S_{2}) = 0.

**Radical Axis**

The radical axis of two circles is the locus of a point which moves in such a way that the length of the tangents drawn from it to the two circles are equal.

A system of circles in which every pair has the same radical axis is called a coaxial system of circles.

The radical axis of two circles S_{1} = 0 and S_{2} = 0 is given by S_{1} — S_{2} = 0.

- The radical axis of two circles is always perpendicular to the line joining the centres of the circles.
- The radical axis of three vertices, whose centres are non-collinear taken in pairs of concurrent.
- The centre of the circle cutting two given circles orthogonally, lies on their radical axis.
- Radical Centre The point of intersection of radical axis of three circles whose centre are non-collinear, taken in pairs, is called their radical centre.

**Pole and Polar**

If through a point P (x_{1}, y_{1}) (within or outside a circle) there be drawn any straight line to meet the given circle at Q and R, the locus of the point of intersection of tangents at Q and R is called the polar of P and po.:.at P is called the pole of polar.

- Equation of polar to the circle x
^{2}+ y^{2}= r^{2}is xx_{1}+ yy_{1}= r^{2}. - Equation of polar to the circle x
^{2}+ y^{2}+ 2gx + 2fy + c = 0 is xx_{1}+ yy_{1}+ g(x + x_{1}) + f(y + y_{1}) + c = 0 - Conjugate Points Two points A and B are conjugate points with respect to a given circle, if each lies on the polar of the other with respect to the circle.
- Conjugate Lines If two lines be such that the pole of one lies on the other, then they are called conjugate lines with respect to the given circle.

**Coaxial System of Circles**

A system of circle is said to be coaxial system of circles, if every pair of the circles in the system has same radical axis.

- The equation of a system of coaxial circles, when the equation of the radical axis P ≡ lx + my + n = 0 and one of the circle of the system S = x
^{2}+ y^{2}+ 2gx + 2fy + c = 0, is S + λP = 0. - Since, the lines joining the centres of two circles is perpendicular to their radical axis. Therefore, the centres of all circles of a coaxial system lie on a straight line, which is perpendicular to the common radical axis.

**Limiting Points**

Limiting points of a system of coaxial circles are the centres of the point circles belonging to the family.

Let equation of circle be x^{2} + y^{2} + 2gx + c = 0

∴ Radius of circle = √g^{2} — c

For limiting point, r = 0

∴ √g^{2} — c = 0 ⇒g = ± √c

Thus, limiting points of the given coaxial system as (√c, 0) and (—√c, 0).

**Important Points to be Remembered**

(i) Circle touching a line L=O at a point (x_{1}, y_{1}) on it is

(x — x_{1})^{2} + (y — y_{1})^{2} + XL = 0.

(ii) Circumcircle of a A with vertices (x_{1}, y_{1}), (x_{2}, y_{2}), (x_{3}, y_{3}) is

(iii) A line intersect a given circle at two distinct real points, if the length of the perpendicular from the centre is less than the radius of the circle.

(iv) Length of the intercept cut off from the line y = mx + c by the circle x^{2} + y^{2} = a^{2} is

(v) In general, two tangents can be drawn to a circle from a given point in its plane. If m_{1} and m_{2} are slope of the tangents drawn from the point P(x_{1}, y_{1}) to the circle x^{2} + y^{2} = a^{2}, then

(vi) Pole of lx + my + n = 0 with respect to x^{2} + y^{2} = a^{2} is

(vii) Let S_{1} = 0, S_{2} = 0 be two circles with radii r_{1} , r_{2}, then S_{1}/r_{1} ± S_{2}/r_{2} = 0 will meet at right angle.

(viii) The angle between the two tangents from (x_{1}, y_{1}) to the circle x^{2} + y^{2} = a^{2} is 2 tan^{-1} (a/√S_{1}).

(ix) The pair of tangents from (0, 0) to the circle x^{2} + y^{2} + 2gx + 2fy + c = 0 are at right angle, if g^{2} + f^{2} = 2c.

(x) If (x_{1}, y_{1}) is one end of a diameter of the circle x^{2} + y^{2} + 2gx + 2fy + c = 0, then the other end will be (-2g – x_{1}, -2f – y_{1}).

**Image of the Circle by the Line Minor**

Let the circle be x^{2} + y^{2} + 2gx + 2fy + c = 0

and line minor lx + my + n = 0.

Then, the image of the circle is

(x — X_{1})^{2} + (y — y_{1})^{2} =r^{2}

where, r = √g^{2} + f^{2} — c

**Diameter of a Circle**

The locus of the middle points of a system of parallel chords of a circle is called a diameter of the circle.

(i) The equation of the diameter bisecting parallel chords y = mx + c of the circle x^{2} + y^{2} = a^{2} is x + my = 0.

(ii) The diameter corresponding to a system of parallel chords of a circle always passes through the centre of the circle and is perpendicular to the parallel chords.

**Common Tangents of Two Circles**

Let the centres and radii of two circles are C_{1}, C_{2} and r_{1}, r_{2}, respectively.

- (i) When one circle contains another circle, no common tangent is possible.

Condition, C_{1}C_{2}< r_{1}– r_{2} - (ii) When two circles touch internally, one common tangent is possible.

Condition , C_{1}C_{2}= r_{1}– r_{2} - (iii) When two circles intersect, two common tangents are possible.

Condition, |r_{1}— r_{2}| < C_{1}C_{2}< |r_{1}+ r_{2}| - (iv) When two circles touch externally, three common tangents are possible.

Condition, C_{1}C_{2}= r_{1}+ r_{2} - (v) When two circles are separately, four common tangents are possible.

Condition, C_{1}C_{2}> r_{1}+ r_{2}

**Important Points to be Remembered**

Let AS is a chord of contact of tangents from C to the circle x^{2} + y^{2} = r^{2}. M is the mid-point of AB.

### Class 11 Key Points, Important Questions & Practice Papers

Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 11 in both Hindi and English language form the link below.

### Class 11 NCERT Solutions

Candidates who are studying in Class 11 can also check Class 11 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 11th. Candidates can click on the subject wise link to get the same. Class 11 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.

### Class 11 Mock Test / Practice

Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 11 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 11 Mock Test / Practice links below.

### Class 11 Exemplar Questions

Exemplar Questions Class 11 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 11. Question from very important topics is covered by Exemplar Questions for Class 11.

CBSE Notes for Class 11 Maths Biology Notes Physics Notes Chemistry Notes

To get fastest exam alerts and government job alerts in India, join our Telegram channel.