Class 11 Physics Waves and Sound – Get here the Notes for Class 11 Physics Waves and Sound. Candidates who are ambitious to qualify the Class 11 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 11 Physics study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of Class 11 Physics for topic Waves and Sound.
- Class: 11th
- Subject: Physics
- Topic: Waves and Sound
- Resource: Notes
CBSE Notes Class 11 Physics Waves and Sound
Candidates who are pursuing in Class 11 are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for Class 11 Physics Waves and Sound from this article.
A wave is a vibratory disturbance in a medium which carries energy from one point to another point without any actual movement of the medium. There are three types of waves
- Mechanical Waves Those waves which require a material medium for their propagation, are called mechanical waves, e.g., sound waves, water waves etc.
- Electromagnetic Waves Those waves which do not require a material medium for their propagation, are called electromagnetic waves, e.g., light waves, radio waves etc.
- Matter Waves These waves are commonly used in modern technology but they are unfamiliar to us. Thses waves are associated with electrons, protons and other fundamental particles.
Nature of Waves
(i) Transverse waves A wave in which the particles of the medium vibrate at right angles to the direction of propagation of wave, is called a transverse wave.
These waves travel in the form of crests and troughs.
(ii) Longitudinal waves A wave in which the particles of the medium vibrate in the same direction in which wave is propagating, is called a longitudinal wave.
These waves travel in the form of compressions and rarefactions.
Some Important Terms of Wave Motion
- (i) Wavelength The distance between two nearest points in a wave which are in the same phase of vibration is called the wavelength (λ).
- (ii) Time Period Time taken to complete one vibration is called time period (T).
- (iii) Frequency The number of vibrations completed in one second is called frequency of the wave.
Its SI unit is hertz.
- (iv) Velocity of Wave or Wave Velocity The distance travelled by a wave in one second is called velocity of the wave (u).
Relation among velocity, frequency and wavelength of a wave is given by v = fλ.
- (v) Particle Velocity The velocity of the particles executing SHM is called particle velocity.
Sound waves of all the mechanical waves that occur in nature, the most important in our everyday lives are longitudinal waves in a medium, usually air, called sound waves.
Sound waves are of three types
(i) Infrasonic Waves The sound waves of frequency lies between 0 to 20 Hz are called infrasonic waves.
(ii) Audiable Waves The sound waves of frequency lies between 20 Hz to 20000 Hz are called audiable waves.
(iii) Ultrasonic Waves The sound waves of frequency greater than 20000 Hz are called ultrasonic waves.
Sound waves are mechanical longitudinal waves and require medium for their propagation. Sound waves can travel through[sound waves cannot propagate through vacuum. If Vs, Vi and Vg are speed of sound waves in solid, liquid and gases, then Vs > Vi > Vg Sound waves (longitudinal waves) can reflect, refract, interfere and diffract but cannot be polarised as only transverse waves can polarised.]
Velocity of Longitudinal (Sound) Waves
Velocity of longitudinal (sound) wave in any medium is given by
where, E is coefficient of elasticity of the medium and ρ is density of the medium.
According to Newton, the propagation of longitudinal waves in a gas is an isoth. ermal process. Therefore, velocity of longitudinal (sound) waves in gas should be
where, ET is the isothermal coefficient of volume elasticity and it is equal to the pressure of the gas.
According to Laplace, the propagation of longitudinal wave is an adiabatic process. Therefore, velocity of longitudinal (sound) wave in gas should be
where, ES, is the adiabatic coefficient of volume elasticity and it is equal to γ p.
Factors Affecting Velocity of Longitudinal (Sound) Wave
(i) Effect of Pressure The formula for velocity of sound in a gas.
Therefore, (p/ρ) remains constant at constant temperature.
Hence, there is no effect of pressure on velocity of longitudinal wave.
(ii) Effect of Temperature Velocity of longitudinal wave in a gas
Velocity of sound in a gas is directly proportional to the square root of its absolute temperature.
If v0 and vt are velocities of sound in air at O°C and t°C, then
(iii) Effect of Density The velocity of sound in gaseous medium
The velocity of sound in a gas is inversely proportional to the square root of density of the gas.
(iv) Effect of Humidity The velocity of sound increases with increase in humidity in air.
If speed of a body in air is greater than the speed of sound, then it .s called supersonic speed. Such a body leaves behind it a conical “egion of disturbance which spreads continuously. Such a disturbance is Called a shock wave.
Speed of Transverse Motion
On a stretched string v = √(T/m)
where, T = tension in the string and m = mass per unit length of the string.
Speed of transverse wave in a solid v = √(η/ρ)
where, η is modulus of rigidity and ρ is density of solid.
Plane Progressive Simple Harmonic Wave
Equation of a plane progressive simple harmonic wave
- y = displacement,
- a = amplitude of vibration
- λ = wavelength of wave, of particle,
- T = time period of wave,
- x = distance of particle from the origin and
- u = velocity of wave.
Important Relation Related to Equation of Progressive Wave
Relation between phase difference and path difference and time difference
The repetition of sound caused by the reflection of sound waves is called an echo.
Sound persists on ear for 0.1 s.
The minimum distance from a sound reflecting surface to hear an echo is 16.5 m.
If first echo be heard after It second, second echo after ~ second, then third echo will be heard after (t1 + t2)s.
Superposition of Waves
Two or more progressive waves can travel simultaneously in the medium without effecting the motion of one another. Therefore, resultant displacement of each particle of the medium at any instant is equal to vector sum of the displacements produced by two waves separately. This principle is called principle of superposition.
When two waves of same frequency travel in a medium simultaneously in the same direction, then due to their superposition, the resultant intensity at any point of the medium is different from the sum intensities of the two waves. At some points the intensity of the resultant wave is very large while at some other points it is very small Or zero. This phenomenon is called interference of waves.
Phase difference between two waves = 0, 2π, 4π
Maximum amplitude = (a + b)
Intensity ∝ (Amplitude)2 ∝ (a + b)2
In general, amplitude = √a2 + b2 +2abcos φ
Phase difference between two waves = π, 3π, 5π
Minimum amplitude = (a ~ b) = Difference of component amplitudes.
Intensity ∝ (Amplitude)2
∝ (a – b)2
A vibrating tuning fork, when rotated near ear, produced loud sound and silence due to constructive and destructive interference.
When two sound waves of nearly equal frequencies are produced simultaneously, then intensity of the resultant sound produced by their superposition increases and decreases alternately with time. This rise and fall intensity of sound is called beats.
The number of maxima or minima heard in one second is called beats frequency.
[The difference of frequencies should not be more than 10. Sound persists on human ear drums for 0.1 second. Hence, beats will not be heard if the frequency difference exceeds 10]
Number of beats heard per second = n1 – n2 = difference of frequencies of two waves.
Maximum amplitude = (a1 + a2)
Maximum intensity = (Maximum amplitude)2 = (a1 + a2)2
For loudness, time intervals are
Stationary or Standing Waves
When two similar waves propagate in a bounded medium in opposite directions, then due to their superposition a new type of wave is obtained, which appears stationary in the medium. This wave is called stationary or standing waves.
Equation of a stationary wave
Nodes and antinodes are obtained alternatively in a stationary waves.
- At nodes, the displacement of the particles remains minimum, strain is maximum,pressure and density variations are maximum.
- At antinodes, the displacement of the particles remains maximum, strain is minimum, pressure and density variations are minimum.
- The distance between two consecutive nodes or two consecutive antinodes = λ/2.
- The distance between a node and adjoining antinode = λ/4.
- All the particles between two nodes vibrate in same phase. particles on two sides of a node vibrate in opposite phase.
- n consecutive nodes are separated n by ((n -l)λ/2) .
Vibrations in a Stretched String
Velocity of a transverse wave in a stretched string.
Where,T is tension in the string and m is mass per unit length of the string.
Fundamental frequency or frequency of first harmonic
Frequency of first overtone or second harmonic
n2 = 2(v/2l) = 2n1
Frequency of second overtone or third harmonic
n3 = 3(v/2l) = 3n1
n1 : n2 : n3 : … = 1 : 2 : 3 : …
Organ pipes are those cylindrical pipes which are used for produe musical (longitudial) sounds. Organ pipes are of two types
- Open Organ Pipe Cylindrical pipes open at both ends.
- Closed Organ Pipe Cylindrical pipes open at one end closed at other end.
It is the sound of lowest frequency produced in fundamental note., vibration of a system.
Overtones Tones having frequencies greater than the runoamen note are called overtones.
Harmonics When the frequencies of overtone are integral multiples of the fundamental, then they are known as harmonics. Thus note of lowest frequency n is called fundamental note or first harmonics. The note of frequency 2n is called second harmonic or first overtone.
Vibrations in Open Organ Pipe
fundamental frequency or frequency of first harmonic
n1 = (2v/l)
frequency of first overtone or second harmonic
n2 = (2v/2l) = 2n1
Frequency of second overtone or third harmonic
n3 = (3v/2l) = 3n1
n1 : n2 : n3 : …. = 1 : 2 : 3 …
Therefore,even and odd harmonics are produced by an open organ pipe.
Vibrations in Closed Organ Pipe
Fundamental frequency or frequency of first harmonic
n1 = (v/4l)
Frequency of first harmonic or third harmonic
n3 = 5(v/4l) = 5n1
n1 : n2 : n3 : … 1 : 3 : 5 : …
Frequency of second harmonic or fifth harmonic
n3 = (3v/2l) = 3n1
Therefore only even harmonics are produced by a closed organ pipe.
Antinode is not obtained at exact open end but slightly above it. The distance between open and antinode is called end correction.
It is denoted by e.
- Effective length of an open organ pipe = (l + 2e)
- Effective length of a closed organ pipe = (1 + e)
- If r is the radius of organ pipe, then e = 0.6 r
Factors Affecting Frequency of Pipe
- Length of air column, n ∝ (1/l)
- Radius of air column, n ∝ (1/r)
- Temperature of air column, n ∝ √T
- Pressure of air inside air column, n ∝ √p
- Density of air, n ∝ (1/√ρ)
- Velocity of sound in air column, n ∝ v
Resonance tube is a closed organ pipe in which length of air coluDf can be changed by changing height of liquid column in it.
In longitudinal mode, vibrations of the prongs of tuning fork are the length of the string.
In transverse mode, vibrations of tuning fork are at 90° to the length of string.
In both modes of vibrations, Melde’s law
p2T = constant, is obeyed.
Characteristics of Musical Sound
Musical sound has three characteristics
(i) Intensity or Loudness Intensity of sound is energy transmitted per second per unit area by sound waves. Its SI unit is watt/metre2. Intensity is measured in decibel (dB).
(ii) Pitch or Frequency Pitch of sound directly depends on frequency.
A shrill and sharp sound has higher pitch and a grave and dull sound has lower pitch.
(iii) Quality or Timbre Quality is the characteristic of sound that differentiates between two sounds of same intensity and same frequency .
Quality depends on harmonics and their relative order and intensity.
The phenomena of apparent change in frequency of source due to a relative motion between the source and observer is called Doppler’s effect.
(i) When Source is Moving and Observer is at Rest When source is moving with ‘velocity towards an observer at rest, then apparent frequency
(ii) When Source is at Rest and Observer is Moving When observer is moving with velocity VO’ towards a source at rest, then apparent frequency.
(iii) When Source and Observer Both are Moving
(a) When both are moving in same direction along the direction of propagation of sound, then
Transverse Doppler’s Effect
(i) The Doppler’s effect in sound does not take place in the transverse direction.
(ii) As shown in figure, the position of a source is S and of observer is O. The component of velocity of source towards the observer is V cos θ. For this situation, the approach frequency is
f ‘ which will now be a function of θ so, it will no more constant.
Similarly, if the source is moving away from the observer as shown above, with velocity component Vs cos θ then,
(iii) If θ = 90°, the Vs cos θ = 0 and there is no shift in the frequency.
Thus, at point P, Doppler’s effect does not occur.
Effect of Wind
If wind is also blowing with a velocity w in the direction of sound, then its velocity is added to the velocity of sound. Hence, in this condition the apparent frequency is givenby
Applications of Doppler’s Effect
The measurement of Doppler shift has been used
- by police to check overspeeding of vehicles.
- at airports to guide the aircraft.
- to study heart beats and blood flow in different parts of the body.
- by astrophysicist to measure the velocities of plants and stars.
Class 11 Key Points, Important Questions & Practice Papers
Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 11 in both Hindi and English language form the link below.
Class 11 NCERT Solutions
Candidates who are studying in Class 11 can also check Class 11 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 11th. Candidates can click on the subject wise link to get the same. Class 11 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.
Class 11 Mock Test / Practice
Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 11 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 11 Mock Test / Practice links below.
Class 11 Exemplar Questions
Exemplar Questions Class 11 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 11. Question from very important topics is covered by Exemplar Questions for Class 11.
To get fastest exam alerts and government job alerts in India, join our Telegram channel.