Class 12 Physics Electromagnetic Induction – Get here the Notes for Class 12 Physics Electromagnetic Induction. Candidates who are ambitious to qualify the Class 12 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 12 Physics study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of Class 12 Physics for topic Electromagnetic Induction.
- Class: 12th
- Subject: Physics
- Topic: Electromagnetic Induction
- Resource: Notes
CBSE Notes Class 12 Physics Electromagnetic Induction
Candidates who are pursuing in Class 12 are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for Class 12 Physics Electromagnetic Induction.
Whenever the magnetic flux linked with an electric circuit changes, an emf is induced in the circuit. This phenomenon is called electromagnetic induction.
Faraday’s Laws of Electromagnetic Induction
(i) Whenever the magnetic flux linked with a circuit changes, an induced emf is produced in it.
(ii) The induced emf lasts so long as the change in magnetic flux continues.
(iii) The magnitude of induced emf is directly proportional to the rate of change in magnetic flux, i.e.,
E ∝ dφ / dt ⇒ E = – dφ / dt
where constant of proportionality is one and negative sign indicates Lenz’s law.
Here, flux = NBA cos θ, SI unit of φ = weber,
CGS unit of φ = maxwell, 1 weber = 108 maxwell,
Dimensional formula of magnetic flux
[φ] = [ML2T-2A-2]
Lenz’s law
The direction of induced emf or induced current is always in such a way that it opposes the cause due to which it is produced.
Lenz’s law is in accordance with the conservation of energy.
Note To apply Lenz’s law, you can remember RIN or ® In (when the loop lies on the plane of paper)
(i) RIN In RIN, R stands for right, I stands for increasing and N for north pole (anticlockwise). It means, if a loop is placed on the right side of a straight current carrying conductor and the current in the conductor is increasing, then induced current in the loop is anticlockwise
(ii) ®IN In ® IN suppose the magnetic field in the loop is perpendicular to paper inwards ® and this field is increasing, then induced current in the loop is anticlockwise
Motional Emf
If a rod of length 1 moves perpendicular to a magnetic field B, with a velocity v, then induced emf produced in it given by
E = B * v * I = bvl
If a metallic rod of length 1 rotates about one of its ends in a plane perpendicular to the magnetic field, then the induced emf produced across its ends is given by
E = 1 / 2 bωr2 = BAf
where, ω = angular velocity of rotation, f = frequency of rotation and A = πr2 = area of disc.
The direction of induced current in any conductor can be obtained from Fleming’s right hand rule.
A rectangular coil moves linearly in a field when coil moves with constant velocity in a uniform magnetic field, flux and induced emf will be zero.
A rod moves at an angle θ with the direction of magnetic field, velocity E = – Blv sin θ.
An emf is induced
(i) When a magnet is moved with respect to a coil.
(ii) When a conductor falls freely in East-West direction.
(iii) When an aeroplane flies horizontally.
(iv) When strength of current flowing in a coil is increased or decreased, induced current is developed in the coil in same or opposite direction.
(v) When a train moves horizontally in any direction.
Fleming’s Right Hand Rule
If we stretch the thumb, the forefinger and the central finger of right hand in such a way that all three are perpendicular to each other, th. if thumb represent the direction of motion, the forefinger represent tile direction of magnetic field, then centra} finger will represent the
direction of induced current.
If R is the electrical resistance of the circuit, then induced current in the circuit is given by I = E / R
If induced current is produced in a coil rotated in uniform magnetic field, then
I = NBA ω sin ωt / R = Io sin ωt
where, Io = NBA ω = peak value of induced current,
N = number of turns in the coil ,
B= magnetic induction,
ω = angular velocity of rotation and
A = area of cross-section of the coil.
Eddy Currents
If a piece of metal is placed in a varying magnetic field or rotated high speed in a uniform magnetic field, then induced current set up
the piece are like whire pool of air, called eddy currents.
The magnitude 0f eddy currents is given by i = – e / R = dφ / dt / R, where R is the resistance.
Eddy currents are also known as Facault’s current.
Self-Induction
The phenomena of production of induced emf in a circuit due to change in current flowing in its own, is called self induction.
Coefficient of Self-Induction
The magnetic flux linked with a coil
φ = LI
where, L = = coefficient of self induction.
The induced emf in the coil
E = – L dl / dt
it unit of self induction is henry (H) and its dimensional formula is [ML2T -2A-2].
Self – inductance of a long solenoid is given by normal text
L = μo N2 A / l = μo n2 Al
where. N = total number of turns in the solenoid,
1 = length of the coil, n = number of turns in the coil and
A = area of cross-section of the coil.
If core of the solenoid is of any other magnetic material, then
L = μo μr N2 A / l
Self – inductance of a toroid L = μo N2 A / 2πr
Where, r = radius of the toroid
Energy stored in an inductor E = 1 / 2 LI2
Mutual Induction
The phenomena of production of induced emf in a circuit due to the change in magnetic flux in its neighbouring circuit, is called mutual induction.
Coefficient of Mutual Induction
If two coils are coupled with each, other then magnetic flux linked with a Coil (secondary coil)
φ = MI
where M is coefficient of mutual induction and I is current flow in through primary coil.
The induced emf in the secondary coil
E = – M dl / dt
where dl / dt is the rate of change of current through primary coil.
The unit of coefficient of mutual induction is henry (H) and its dimension is [ML2T-2A-2].
The coefficient of mutual induction depends on geometry of two coils, distance between them and orientation of the two coils.
Coefficient of Coupling
Two coils are said to be coupled if full a part of the fuse produced by one links with the other.
K = √M / L1 L2, where L1 and L2 are coefficients of self-induction of the two coils and M is coefficient of mutual induction of the two coils.
Coefficient of coupling is maximum (K = 1) in case (a), when coils are coaxial and minimum in case (b), when coils are placed a right angles.
Mutual inductance of two long coaxial solenoids is given by
M = μ N1 N2 A / l
= μ n1 n2 Al
where N1 and N2 are total number of turns in both coils, n1 n2 are number of turns per unit length in coils, A is area of cross-section of coils and 1 is length of the coils.
Grouping of Coils
(a) When three coils of inductances L1, L2 and L3 are connected in series and the coefficient of coupling K = 0, as in series, then
L = L1 + L2 + L3
(b) When three coils of inductances L1, L2 and L3 are connected in parallel and the coefficient of coupling K= 0 as in parallel, then
L = 1 / L1 + 1 / L2 + 1 / L3
If coefficient of coupling K = 1, then
(i) In series
(a) If current in two coils are in the same direction, then
L = L1 + L2 + 2M
(b) If current in two coils are in opposite directions, then
L = L1 + L2 – 2M
(ii) In parallel
(a) If current in two coils are in same direction, then
L = L1 L2 – M2 / L1 + L2 + 2M
(b) If current in two coils are in opposite directions, then
L = L1 L2 – M2 / L1 + L2 – 2M
Class 12 Key Points, Important Questions & Practice Papers
Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 12 in both Hindi and English language form the link below.
Class 12 NCERT Solutions
Candidates who are studying in Class 12 can also check Class 12 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 12th. Candidates can click on the subject wise link to get the same. Class 12 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.
Class 12 Mock Test / Practice
Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 12 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 12 Mock Test / Practice links below.
Class 12 Exemplar Questions
Exemplar Questions Class 12 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 12. Question from very important topics is covered by Exemplar Questions for Class 12.
