Class 12 Physics Magnetic Effect of Current – Get here the Notes for Class 12 Physics Magnetic Effect of Current. Candidates who are ambitious to qualify the Class 12 with good score can check this article for Notes. This is possible only when you have the best CBSE Class 12 Physics study material and a smart preparation plan. To assist you with that, we are here with notes. Hope these notes will helps you understand the important topics and remember the key points for exam point of view. Below we provided the Notes of Class 12 Physics for topic Magnetic Effect of Current.

**Class:**12th**Subject:**Physics**Topic:**Magnetic Effect of Current**Resource:**Notes

## CBSE Notes Class 12 Physics Magnetic Effect of Current

Candidates who are pursuing in Class 12 are advised to revise the notes from this post. With the help of Notes, candidates can plan their Strategy for particular weaker section of the subject and study hard. So, go ahead and check the Important Notes for Class 12 Physics Magnetic Effect of Current.

**Oersted’s Experiment**

A magnetic field is produced in the surrounding of any current carrying conductor.

The direction of this magnetic field can be obtained by Ampere’s swimming rule.

SI unit of magnetic field is Wm^{-2} or T (telsa).

The strength of magnetic field is called one tesla, if a charge of one coulomb, when moving with a velocity of 1 ms^{-1} along a direction perpendicular to the direction of the magnetic field experiences a force of one newton.

1 tesla (T) = 1 weber metre^{-2} (Wbm^{-2})

= 1 newton ampere^{-1} metre^{-1} (NA^{-1} m^{-1})

CGS units of magnetic field are called gauss or oersted.

1 gauss = 10^{-4} tesla.

**Maxwell’s Cork Screw Rule**

If a right handed cork screw is imagined to be rotated in such a direction that tip of the screw points in the direction of the current, then direction of rotation of thumb gives the direction of magnetic line of force.

The conventional sign for a magnetic field coming out of the plane and normal to it is a dot i.e.,

The magnetic field perpendicular to the plane in the downward action is denoted by ®.

**Ampere’s Swimming Rule**

If a man is swimming along the wire in the direction of current his face turned towards the needle, so that the current enters through his feet, then north pole of the magnetic needle will be deflected towards his left hand.

**Magnetic Field**

The space in the surrounding of a magnet or any current carrying conductor in which its magnetic influence can be experienced.

**Biot Savart’s Law**

The magnetic field produced by a current carrying element of length dl, carrying current I at a point separated by a distance r is given by

dB = μ_{o} / 4 π Idl * r / r^{3}

or dB = μ_{o} / 4 π Idl sin θ / r^{2}

where, θ is the angle between the direction of the current and μ_{o} is absolute permeability of the free space.

SI unit of magnetic field is Wm^{-2} or (tesla) and CGS unit of magnetic field is gauss or oersted 1 gauss = 10^{-4}tesla.

The direction of magnetic field dB is that of I dl * r .

**Magnetic Field Due to a Straight Current Carrying Conductor**

where φ1 and φ2 are angles, which the lines joining the two ends of the conductor to the observation point make with the perpendicular from the observation point to the conductor.

For infinite length conductor and observation point is near the centre of the conductor,

B = μ_{o} / 4 π 2I / r

for infinite length conductor and observation point is near one end of the conductor,

B = μ_{o} / 4 π I / r

**Magnetic Field Lines**

- They are used to res present magnetic B field in a region.
- They are closed continuous curves.
- Tangent drawn at any point gives the direction of magnetic field.
- They cannot interact.
- Outside a magnet, they are directed from north to south pole and inside a magnet they are directed from south to north.

The magnetic field lines due to a straight current carrying conductor are concentric circles having centre at conductor and in a plane perpendicular to the conductor.

The direction of magnetic field lines can be obtained by Right Hand Thumb Rule

**Right Hand Thumb Rule**

If we hold a current carrying conductor in the grip of the right hand in such a way that thumb points in the direction of current, then curling of fingers represents the direction of magnetic field lines.

**Magnetic Field on the Axis of a Current Carrying Circular Coil**

Magnetic field at axis at a distance x from centre O.

where, r = radius of the coil, n = number of turns in the coil and I = current,

At centre of the coil, B = μ_{o} nl / 2 r

If we look at one face of the coil and the direction of current flowing through the coil is clockwise, then that face has south polarity and if direction of current is anti-clockwise, then that face has north polarity.

**Magnetic Dipole**

Every current carrying loop is a magnetic dipole. It has two poles south

(S) and north (N).

This is similar to a bar magnet.

Each magnetic dipole has some magnetic moment (M). The magnitude of M is,

|M| = NiA

where, N = number of turns in the loop,

i = current in the loop and

A = area of cross-section of the loop.

The current carrying loop behaves as a small magnetic dipole placed along the axis one face of the loop behaves as north pole while the other face of loop behaves as south pole.

**Ampere’s Circuital Law**

The line integral of magnetic field induction B around any closed path in vacuum is equal to 110 times the total current threading the closed path, i.e.,

where B is the magnetic field, dl is small element, μ_{o} is the absolute permeability of free space and I is the current.

Ampere’s circuital law holds good for a closed path of any size and shape around a current carrying conductor because the relation is independent of distance form conductor.

**Solenoid**

A solenoid is a closely wound helix of insulated copper wire.

Magnetic field at a point well inside a long solenoid is given by

B = μ_{o} nl

where, n = number of turns per unit length and

I = current flowing through the solenoid

Magnetic field at a point on one end of a long solenoid is given by

B = μ_{o} nl / 2

**Toroid**

A toroidal solenoid is an anchor ring around which is large number of turns of a copper wire are wrapped.

A toroid is an endless solenoid in the form of a ring.

Magnetic field inside the turns of toroid is given by

B = μ_{o} nl

Magnetic field inside a toroid is constant and is always tangential to the circular closed path.

Magnetic field at any point inside the empty space surrounded by the toroid and outside the toroid, is zero, because net current enclosed by these space is zero.

**Magnetic Field Due to a Current Carrying Long Circular Cylinder**

Outside the cylinder (r > R)

B = μ / 2 π l / r

Inside the cylinder when it is made of a thin metal sheet,

B = O

Inside the cylinder when current is uniformly distributed throughout the cross-section of the cylinder (r < R)

B = μ_{o} μ_{r} / 2 π Ir / R^{2}

where, μ_{o} and μ_{r} are permeabilities of free space and material of the cylinder, I is current flowing through the cylinder and r is radius of the cylinder.

**Force Acting on a Charge Particle Moving in a Uniform Magnetic Field**

F = q(v * B)

or F = |F| = Bqv sin θ

where, B = magnetic field intensity,

q = charge on particle,

u = speed of the particle and

θ = angle between magnetic field and direction of motion.

This force is perpendicular to B as well as v.

Its direction can be obtained from Fleming’s left hand rule.

Magnetic force acting on a current carrying conductor in a uniform magnetic field is given by

F = I ( I * B)

**Fleming’s left Hand Rule**

If we stretch the thumb, the forefinger and the central finger if left hand in such a way that all three are perpendicular to each other, then if forefinger represents the direction of magnetic field, central finger represents the direction of current flowing through the conductor, then thumb will represent the direction of magnetic force.

**Lorentz Force**

The total force experienced by a charge moving inside the electric and magnetic fields is called Lorentz force. It is given by F = q(E * v * B)

**Motion of a Charged Particle in a Uniform Magnetic Field**

When charged particle enter normal to the magnetic field it follows a circular path.

The radius of the path, r = mv / Bq

∴ r ∝ mv

and r ∝ 1 / (q / m)

Time period, T = 2πm / Bq

When charged particle enter magnetic field at any angle except 90°, then it follows helical path.

The radius of the path, r = mv sin θ / Bq

The distance travelled by the charged particle in one time period due to component of velocity v cos θ, is called pitch of the path

Pitch = T * v cos θ = 2πmv cos θ / Bq

**Cyclotron**

Cyclotron is a device used to accelerate positively charged particles such as proton, deuteron etc.

**Principle of Cyclotron**

A positively charged particle can be accelerated through a modera. electric field by crossing it again and again by use of strong magnetic field.

Radius of circular path, r = mv / Bq

Cyclotron frequency v = Bq / 2πm

where m and q are mass and charge of the positive ion and B is strength of the magnetic field.

Maximum kinetic energy gained by the particle.

E_{max} = B^{2}q^{2}r^{2}_{o} / 2m

where, r_{o} = maximum radius of circular path.

When a positive ion is accelerated by the cyclotron, it moves with greater and greater speed. As the speed of ion becomes comparable with that of light, the mass of the ion increases according to the relation.

Where, m = mass of the lOD.

m_{o} = maximum mass of the ion.

v = speed of Ion and

c = speed of light.

**Limitations of the Cyclotron**

(i) Cyclotron cannot accelerated uncharged particle like neutron.

(ii) The positively charged particles having large mass i.e., ions cannot move at limitless speed in a cyclotron.

Force between Two Infinitely Long Parallel Current Carrying Conductors

The force is attractive if current In both conductors is in same direction and repulsive if current 10 both conductors is in opposite direction.

(if the currents is both parallel wires arc equal and In same direction, then magnetic field at a point exactly half way between the wire is zero.)

**Torque acting on a Current Carrying Coil Placed Inside a Uniform Magnetic Field **

Torque acting on a current carrying coil placed inside a uniform magnetic field is given

τ = NBIA sin θ

Where, N = number of turns in the coil,

E = magnetic field intensity,

I = current 10 the coil and

A = area of cross-section of the coil,

θ = angle between magnetic field and normal to the plane of the coil.

**Moving Coil Galvanometer**

It is a device used for the detection and measurement of the currents.

In equilibrium, deflecting torque = restoring torque

where, k = restoring torque per unit twist,

N = number of turns in the coil,

B = magnetic field intensity,

A = area of cross-section of the coil and

θ = angle of twist.

**Current Sensitivity**

The deflection produced per unit current in galvanometer is called its current sensitivity.

Current sensitivity

I_{s} = θ / I = NBA / K

**Voltage Sensitivity**

The deflection produced per unit voltage applied across the ends of galvanometer is called its voltage sensitivity.

**Voltage sensitivity**

V_{s} = θ / V = NBA / KR

where R is the resistance of the galvanometer.

Therefore for a sensitive galvanometer

(i) N should be large

(ii) B should be large

(iii) A should be large

(iv) K should be small

**Ammeter**

An ammeter is a low resistance galvanometer used for measuring the current in a circuit.

It is always connected in series.

**Conversion of a Galvanometer into an Ammeter**

A galvanometer can be converted into an ammeter by connecting a low resistance into its parallel.

If G is the resistance of a galvanometer and it give full scale deflection for current, I_{g} then required low resistance S, connected in its parallel for converting it into an ammeter of range I is given by

The resistance of an ideal ammeter is zero.

**Voltmeter**

A voltmeter is a high resistance galvanometer used for measuring the potential difference between two points.

It is always connected in parallel.

The resistance of an ideal voltmeter is infinity.

**Conversion of a Galvanometer into a Voltmeter**

A galvanometer can be converted into a voltmeter by connecting a high resistance into its series.

If a galvanometer of resistance G show full scale deflection for current I_{g} then required high resistance R, connected in series for converting it into a voltmeter of range V is given by

### Class 12 Key Points, Important Questions & Practice Papers

Hope these notes helped you in your schools exam preparation. Candidates can also check out the Key Points, Important Questions & Practice Papers for various Subjects for Class 12 in both Hindi and English language form the link below.

### Class 12 NCERT Solutions

Candidates who are studying in Class 12 can also check Class 12 NCERT Solutions from here. This will help the candidates to know the solutions for all subjects covered in Class 12th. Candidates can click on the subject wise link to get the same. Class 12 Chapter-wise, detailed solutions to the questions of the NCERT textbooks are provided with the objective of helping students compare their answers with the sample answers.

### Class 12 Mock Test / Practice

Mock test are the practice test or you can say the blue print of the main exam. Before appearing in the main examination, candidates must try mock test as it helps the students learn from their mistakes. With the help of Class 12 Mock Test / Practice, candidates can also get an idea about the pattern and marking scheme of that examination. For the sake of the candidates we are providing Class 12 Mock Test / Practice links below.

### Class 12 Exemplar Questions

Exemplar Questions Class 12 is a very important resource for students preparing for the Examination. Here we have provided Exemplar Problems Solutions along with NCERT Exemplar Problems Class 12. Question from very important topics is covered by Exemplar Questions for Class 12.